Rehabilitation Equipment

Page | 1 | 2 | 3 |

1 - 10 of 30 items

Closed End Training Stairs


All-oak Construction. Steps Descend From Only One End. Anti-slip Material Adhered To Risers. Features Four 6" Risers. Top Platform Measures 24" X 30". Measures: 30" W X 54" L. Weight Capacity 450 Lbs.

Closed End Training Stairs

Item # TS2

Convertible Training Stairs, Large


Sturdy, Functional Design Offers Straight-line Or Corner Configurations. Heavy-duty Solid Oak Handrails Are Bolted To The Oak Plywood Base. Now Available In Two Sizes. The Top Platform Measures 30"x 30". Weight Capacity 450 Lbs.

Convertible Training Stairs, Large

Item # TS3

Convertible Training Stairs, Standard


Sturdy, Functional Design Offers Straight-line Or Corner Configurations. Heavy-duty Solid Oak Handrails Are Bolted To The Oak Plywood Base. Now Available In Two Sizes. The Top Platform Measures 30"x 30". Weight Capacity 450 Lbs.

Convertible Training Stairs, Standard

Item # TS4

Crescent Work Table


Cutout Allows A Wheelchair To Sit Close To The Table With Full Elbow And Shoulder Range In A Horizontal Plane. May Be Used As A Powdered Surface For Upper-extremity Exercise. Height Adjusts From 24" To 35". Measures 60" X 36".

Crescent Work Table

Item # WT1C

Deluxe Oak Mobile Posture Mirror with floor stand


Distortion-free 1/4" Mirror With Hardwood Frame. Glass Size Is 23" X 67"; Overall Size Is 28" X 75". Available In Deluxe Oak, Economical Poplar Hardwood, And Poplar Wall-mount Styles.

Deluxe Oak Mobile Posture Mirror with floor stand

Item # APM1D

Deluxe wheelchair work table

Fits Over Any Wheelchair. The Hand Crank Adjusts The Height From 28" To 39". The Base Measures 34" Wide, 26" Deep. The Top Is 32" X 36", And The Cutout Is 22" X 6". The Tray Adjusts At Multiple Positions To A Maximum Of 45º And Has A Raised Rim To Prevent Small Items From Easily Sliding Off The Edge. 2" Locking Casters Included. Available With The Top Hinged At Either The Cut-out Side Or The Flat Side.

	Deluxe wheelchair work table	Item # WCT1D
	Deluxe wheelchair work table, hinge at cutout	Item # WCT1DC

Dynatronics Oak Stairs and Ramps

For Effective Ambulation Therapy With Canes, Crutches, Or Wheelchairs. Constructed Of Oak Plywood For Beauty And Durability. Training Ramp Measures 44" Wide And 84" Long, And Tapers In Height From 8" To 1/2". Three Nested Steps Pull Out From Under Top Surface Platform To Simulate Curb Areas. Step Heights Are 2", 4", And 6". Anti-slip Material Adhered To Each Step For Safety And Traction. Weight Capacity 450 Lbs.

Curb & Ramp Training Set

Item # CR4484

Electric Hi-Lo Block Table


Features Beautiful 1 3/4"-thick Maple Hardwood Surface With Scratch-resistant Lacquer Coating. Surface Height Adjusts Electrically From 26" To 38" With Convenient Hand Control. Laminate Top Is Available For The 48" X 66" Model.

	Electric Hi-Lo Butcher-block Work Table 48" x 66"	Item # WTE1
	Electric Hi-Lo Table, Laminate Top 48"x66"	Item # WTE1E
	Electric Hi-Lo Butcher Block Table 28" x 60"	Item # WTE2
	Electric Hi-Lo Butcher Block Table 36" x 60"	Item # WTE3

Electric Hi-Lo Stand-In Table

Lifts Patients From Sitting To Standing Position. A Four-point Support System Stabilizes Patients At The Feet, Knees, Buttocks And Chest As They Experience The Benefits Of Standing. A Back Pad Provides Additional Lumbar Support. Chest Pad Supports Patient?s Trunk. Hand-held Switch Adjusts Table Height And Lifts Patient Into Position. Locking Swivel Casters Provide Portability. Weight Capacity 375 Lbs. Comes With A 5-year Warranty.Specifications: Table Height Adjustment: 42 1/2" - 52 1/2", Tray Dimensions: 32 3/4" - 24 1/4", Base Dimensions: 42" - 37"

Electric Hi-Lo Stand-In Table

Item # STE1(*)

Electric Parallel Bars


Electrically-adjusted Height From 27" To 37", Width From 15" To 25 1/2". Handrails Are Constructed Of 1 5/8" Stainless Steel. Tapered Platform Is Maple Hardwood Coated With Durable Styrene. Width Between Uprights Is 30 1/2". Manual Override Crank And Removable Abduction Board Are Included. Available In 10' Length.